Infolinks Text Add

Indian Navy Recruitment : BE/BTech : 2015 Batch : On 10th November 2014

About Indian Navy Recruitment:
The Indian Navy (भारतीय नौ सेना, Bhāratīya Nau Senā) is the naval branch of the armed forces of India. The President of India serves as the Commander-in-Chief of the Navy. The Chief of Naval Staff (CNS), usually a four-star officer in the rank of admiral, commands the navy. The Indian Navy can trace its lineage back to the Royal Indian Navy, however the modern navy as it is known today was not officially created until 1947 after independence was gained from the United Kingdom. The 17th century Maratha emperor Chhatarpati Shivaji Bhosle is considered as the ‘Father Of The Indian Navy’.
Date of Drive : 10th November 2014
Salary: Rs 83,000/-per month
Reporting Time: 8:30 am on the day of campus drive
Batch Allowed: 2015 Passing out only
Venue:
Panipat Institute of Engineering & Technology,
70 Milestone, G T Road, Samalkha,
Panipat-132102 (Haryana)
Eligibility Criteria:
(i) Education
For Male Candidates (all branches)
B.Tech-CSE, IT, Mechanical, Civil, Instrumentation, Electrical, Electronics ,Tele Communications ,Electronics and Instrumentation ,Electronics and Communication ,Power Engineering, Control System Engineering, Aeronautical, Aero Space, Metallurgy ,Architecture, Naval Architecture , Marine ,Automobile, Mechtronics, Production Engineering , Metallurgy, Automation & Robotics , Industrial Engineering & Management or any stream of B Tech (with Physics & Maths in 10+2) for Pilot & Observer
For Female Candidates (Naval Architecture & Logistics Only)
B Tech-Mechanical, Civil, Aeronautical, Aero Space , Metallurgy , B.Architecture, Naval Architecture
(ii) Candidate must have minimum of 60% marks in overall aggregate on completion of BE/B Tech. The candidate opting for Naval Architecture as one of the choice for the entry must have 6.75 CGPA overall grade on 10 Point Scale. The candidate failing to meet minimum cut off percentage will not be permitted to join INA.
(iii) Candidates who have FAILED in PABT (Pilot Aptitude Battery Test) earlier are not eligible for the Pilot entry.
(iv) Candidates are not eligible for entry if they have not studied Physics, Chemistry & Mathematics at Intermediate (10+2) level.
(v) Candidates having backlog in any semester at the time of SSB interview are not allowed to attend the SSB.
Age Limit: 19 to 24 years as on 01 July 2015 (i.e. born between 02 Jul 1991 to 01 Jul 1996 both dates inclulsive).
Cost to Company (CTC): As per Govt. rules
(Approx. calculation-The max CTC for a Sub Lieutenant would be approximately Rs 83,000/-per month.( i.e Rs 9.96 lac p.a) This includes Basic Pay, DA, Grade pay, Military Service Pay, House Rent Allowances and Transport allowance. These rates are not statutory and are subject to change.
More Info & Registration Link: Click Here

Xiaomi Mi 4 takes on the market with steel

Xiaomi Mi 4 takes on the market with steel





As expected, Xiaomi revealed today its next flagship, the Mi 4and as expected, the it boasts of the best in class specs, save a few here and there. Proving past rumors and leaks right, this Chinese manufacturer has indeed tried to give the Xiaomi Mi 4 a more premium personality, by utilizing a slightly heavier but definitely sturdier stainless steel material for its body.
Let's get the tech specs out of the way. The Xiaomi Mi 4, unsurprisingly, boasts of top of the line hardware, though there are some areas where flagships from major brands do better. While we may all probably wish for 2K screens, the Full HD resolution on this 5-inch panel, made by Sharp and Japan Display Inc (JDI), is just right for its size. Considering very few devices run on the latest Snapdragon 805, the 2.5 Ghz quad-core Qualcomm Snapdragon 801 is still pretty much at the top. And with 3 GB of RAM, things are guaranteed to run fast and smooth, at least up to a certain point.
xiaomi-mi4-9
But it is the design of the Xiaomi Mi 4 that bears noting. Not many employ the use of steel for its devices. Although it is more durable, it is a bit more expensive, heavier, and harder to get right. But when done well, the quality of craftsmanship shows, as seen in the iPhone and some of Sony's high-end Xperia phones. Xiaomi has managed to keep the weight down to 149 g, not exactly the lightest but an achievement nonetheless. That said, there is one part of the Mi 4's appearance that might raise a few eyebrows. When leaks revealed that the company would be returning to more rounded corners, the photos hinted at a design more similar to Samsung's devices. The final product shown on stage today, however, reveals one that could be mistaken for an iPhone.
xiaomi-mi4-12
But an iPhone, at least by default, would not have the customization options that the Xiaomi Mi 4 has to offer, particularly in terms of back covers. Taking a page from Motorola's book, the company will be making available a variety of swappable covers, not just of varying colors but even of different textures, including wood, fabric, leather, and even marble. The default color options, however, are black and white. Xiaomi also has two internal storage options available, of course with different prices. The 16 GB model costs 1,999 RMB, around $322, while the 64 GB has a price tag of 2,499 RMB, roughly $402. Xiaomi has a rather interesting launch schedule for the Mi 4, starting July 29 on China Unicom, August for China Telecom, and September for China Mobile 4G. Now all that remains is the biggest questions of them all: will it ever land on the US?

Install Android 2.2.1 Froyo On iPhone 3G / 2G Using Bootlace in Cydia [No Computer Required]

Probably the most easiest way to install Android on an iPhone 2G/3G is via iPhoDroid, which we did cover previously. But the problem with it is; you should have a computer to run the whole process of installing Android on your iPhone 2G/3G. But thanks to Bootlace 2.1, you can now install Android 2.2.1 Froyo on your jailbroken iPhone without needing to connect it to any PC or Mac!
Android 2.2 on iPhone
To kick things off, Bootlace 2.1 is only compatible with the following iPhones and iOS’:
  • iPhone 2G running iOS 3.1.2 and 3.1.3.
  • iPhone 3G running iOS 3.1.2, 3.1.3, 4.0, 4.0.1, 4.0.2 and 4.1.
And the jailbreaking tools which are supported by Bootlace 2.1 are:
  • PwnageTool
  • Redsn0w
  • Blackra1n
You can follow our guide for jailbreaking the iPhone 3G using Redsn0w here, Blackra1n hereand PwnageTool here.
iPhone 2G users can similarly follow the steps to jailbreak using Redsn0w here, Blackra1n hereand PwnageTool here.
If you don’t meet the above requirements then you can’t go ahead with the installation of Android on your iPhone 2G/3G. If you do, then proceed with the following steps.
Step 1: Jailbreak your iPhone 2G/3G using the steps given in the links above. When you’re done, run Cydia from your iPhone’s springboard, and add “http://repo.neonkoala.co.uk/”(without quotes) as repository. Tap “Add Source”, and then you need to install “Bootlace” as shown in the screenshots below.
Install Android on iPhone 3G (2) Install Android on iPhone 3G (1)
Step 2: Once you have installed Bootlace, fire up the app from the homescreen:.
Install Android on iPhone 3G (3)
Step 3: From “Bootlace”, you need to install “OpeniBoot”.
Android 2.2 on iPhone (4) Android 2.2 on iPhone (1)
Step 4: Once “OpeniBoot” has been installed, tap on the “iDroid” tab in the bottom row to install iDroid.
Android 2.2 on iPhone (6) Android 2.2 on iPhone (5)
Step 5: Once iDroid has been installed on your iPhone, tap the “QuickBoot” tab in the bottom row, followed by tapping on the Android logo, your iPhone will now restart and boot into Android. That’s it, you’re done! You now have Android 2.2.1 Froyo on your iPhone.
IMG_0007
Please refer to Step 4 again if you want to check for Android updates in future. And it’s highly recommended that you perform the whole feat over a WiFi connection. [via The Readers Eye]
You may also like to check out:
You can follow me on Twitter or join our Facebook fanpage to keep yourself updated on all the latest iPhone jailbreaking and unlocking releases.

Android Debugging - ADB over Network

If you have a CM Nightly (CyanogenMOD 9 - Ice Cream Sandwitch build), you don’t need any application on Android to support adb wirelessly (as in the case of above post that required adbWireless)

1. Head to Settings > Developer Options, and turn on ADB over Network

2. Head to System > About > Status and note down your local IP

3. Connect to the IP and we are done

N.B. -

You might want to run adb tcpip <port no.> for the 1st time with a cable, if connection does not happen.

Secondly, for people with different kernels you can include the following in the the init.d scripts (if developing a rom) that execute at boot up: - Link to code

Also, if you love terminal like me, you must have this on your android by now (or any other emulator). If so, you can also enable adb networking manually by avoiding all of the above techniques (you must be rooted of course):

Hope you liked this way

10 Signs Your Computer Is Going To Crash & What To Do

10 Signs Your Computer Is Going To Crash & What To Do

Computer crashes often occur suddenly and with little obvious warning. Once it happened, there is not much you can do, other than wait for the reboot or manually force a reset. The randomness with which a crash can strike is what makes it frustrating; one moment your PC is fine, the next it’s down and your files with it.

Most crashes are not as random as they seem, however. There are a number of potential warning signs. Most of them are minor issues that the average user would brush off as an annoyance, but they hint at a larger problem that can grow and eventually crash your computer at the most inopportune time. Vigilance and knowledge can help find and solve problems before they turn a PC into a paperweight. Here’s the issues to look for – and how to fix them before they cause any harm.

Hardware Conflicts

windowsdevicemanager

Sometimes two components in a PC will try to consume the same resources or perform the same task. This creates a hardware conflict, and it manifests itself in unusual behavior during certain tasks. An audio conflict, for example, might disable audio in some programs, but not in others. Not all conflicts will crash a PC, but some can cause instability, which leads to a Blue Screen Of Death and/or a reboot.

You can usually see a hardware conflict by opening Windows’ Device Manager. You can find it in the control panel, or via Windows Search. Hardware with a conflict will appear with a yellow exclamation point next to it. Try re-installing drivers for the malfunctioning hardware or, if you can’t make two parts stop interfering with each other, try disabling one in Device Manager. Should even that not work, you’ll have to physically remove one of the conflicting components.

Random File Or Program Corruption Issues

A classic sign of a slow-growing problem is random file and program corruption errors. Files that always worked suddenly don’t open, or only work on occasion. They may or may not be accompanied by an error message.

Several issues could cause this problem. First, make sure your anti-virus is running and up-to-date, and then run a full system scan for malware. A virus sometimes will cause random file corruption issues. Another likely culprit is a failing hard drive, so you should check it for errors. And if that doesn’t reveal the problem, look for hardware conflicts in the Windows Device Manager; a driver issue might be responsible.

Slow, Unreliable, Or Noisy Mechanical Hard Drive

harddrive1

Mechanical hard drives are likely sources of problems in modern PCs. Though they’ve become more reliable over time, they still contain mechanical parts that will eventually wear out, and that makes failure a reality users must prepare for.

If you find that programs are taking a long time to load, that files don’t always open, or that the drive has become louder while working, then your hard drive could be nearing the end of its life. You should check the drive for errors, but don’t consider yourself problem-free if none appear. Backup your data just to be safe.

Occasional Boot Errors

windowsbooterror

A sure sign that something has gone wrong is an occasional error when booting your PC, usually something along the lines of “boot device not found.” Windows will fail to boot, but it might work at a later time, even immediately if you hit the reset button. This is a sign that something is wrong with your hard drive, or that your Windows installation has somehow become corrupt. Replacing the drive and/or re-installing Windows is usually the only fix.

However, before doing either, do make sure that you haven’t mistakenly left an external hard drive or USB drive plugged in. Some PCs will try to boot from a USB device before the hard drive, and that will cause a boot error.

Poor Performance

General poor performance, from launching programs to watching YouTube video and playing games, often results from the cumulative effects of software installed on a Windows PC. If you’re not careful, you may find you’ve installed more than your computer can handle, and it will perform poorly. Cleaning Windows might help, though if your case is particularly bad, you may have to re-install the operating system.

If the problem persists, then hardware is probably the culprit. Try some free benchmark programs, record the results, and use them to determine what part is slowing down your PC. You can then decide if it should be replaced.

Spotty Or Unreliable Internet, Even Over Ethernet

ethernetadapter

Unusually, poor Internet performance that can’t be linked to a problem with your ISP or router is often a bad sign. It may mean that your WiFi or Ethernet adapter is encountering problems, or it might be a sign of malware robbing your bandwidth. Eventually, the problem might make Internet access impossible or, if the source is malware, your PC could suffer permanent damage.

Download a bandwidth meter for your PC to see how your home network is being used. If bandwidth is being consumed when you’re not using your computer, malware is likely the problem, so check out our malware removal guide. If there’s no unusual usage, then the problem is likely with your adapter, and it will probably need to be replaced.

Video Artifacts

videoartifact

The video that you view on a PC, no matter its source, is effectively a stream of data that’s turned into an image. An error in that data can cause an “artifact,” which might appears as blocks of random color, strange lines or partially missing 3D geometry.

All of these problems are signs that your PC’s graphics processor is encountering an issue. Often the problem is excessive heat; you may just need to open your computer and give it a good cleaning. If that doesn’t solve the issue, then the GPU is likely on the out, and should be replaced.

At times you may have difficulty deciding if an artifact is caused by the video card, or by a bug in a game, or by poor video compression. A video card stability test can helpyou determine the source of the problem.

An Unusually Loud System Fan

coolingfan7

A computer with fans that are louder than normal may be screaming for help because its internals are too warm, a situation that can eventually lead to a crash and even hardware damage. You can use a PC monitoring tool like SpeedFan to investigate the problem and see what temperature your CPU and GPU are reporting.

If the situation seems heated, open up your desktop and clean out its fans with a can of compressed air. Laptop owners have fewer options, but you can still try to clean out the exhaust fan, or buy a cooling pad.

Software And/Or Adware Launches At Random

adware

Software that launches without your permission is a clue that you may become a victim of malware. Often the programs that appear will be linked to advertisements, but any Trojan can allow this avenue of attack. You might also notice that certain hardware, like the webcam, may activate without your consent. Eventually, this tampering might lead to problems as your PC is slammed with unwanted programs or its files are corrupted maliciously.

Solving this problem is simple in theory, but difficult in reality. Read our malware removal guide to find out the best ways to clean up after an attack. Alternatively, if your files are backed up and you don’t want a lot of hassle, you can perform a clean re-install of Windows.

Windows Crashes While You’re Not Looking

You may already have a computer that has crashed, but not while you’re looking. Perhaps the PC was left to go into sleep mode, or just left on overnight.

The fact the PC hasn’t crashed while you’ve been using it is likely due to luck and shouldn’t be considered a symptom. In most cases, this situation is caused by a driver or hardware issue that’s triggered at random or when an exact set of circumstances are met. If you haven’t already checked for hardware conflicts, do so now.

Should no conflicts be obvious, try updating the drivers for your video card, sound card, motherboard and WiFi or Ethernet adapter. If the problem persists, run benchmarks to see if the stress causes the error to emerge. And should that not work, you may have to resort to trial-and-error by disabling components to see if the problem goes away. You might also investigate if there’s any software scheduled to run overnight on your PC, such as a backup or anti-virus, which could be triggering the crash.

Did You Find What You Were Searching For ?

Did You Find Your Software ? Yes
No
If Not Please let us know. We'll provide your software As soon as Possible
Please specify your Email-ID
Name: